Help: RetroUSB AVS (NES)

Console guide

NES on the RetroUSB AVS

Play your original NES cartridges on the RetroUSB AVS and earn achievements. Cheevotron's firmware for the AVS sends a sharp 720p picture with sound over HDMI, adds the look of a CRT if you want it, and shows every unlock right over the game on your TV, with a chime. For an overview, see Achievements on a real NES.

Drawing of the pop-up as the AVS shows it, in its own pixel font. Real captures follow.

Android only. Cheevotron's firmware plays real cartridges and the EverDrive N8 Pro on the AVS, with the Android app: the phone identifies the game and the achievements unlock on the TV. We can't test every NES cartridge. If one of yours doesn't work, write to hello (at) cheevotron (dot) com with the game's name and region.

What you need

  • A RetroUSB AVS.
  • Your NES cartridges, or an EverDrive N8 Pro.
  • A TV or monitor with HDMI.
  • An Android phone with the Cheevotron app. An iPhone can't connect to the AVS over USB.
  • A USB cable from the AVS's USB port to your phone. Most phones need a USB OTG adapter; an OTG hub that also charges the phone works well for long sessions. The EverDrive N8 Pro needs more power than a phone's USB port gives: connect the AVS through an OTG hub with its own charger.

What the firmware gives you

  • Unlocks on your TV. A toast with the badge, title, points and description, or just the badge, in one of eight spots inside the picture. The chime plays through the TV's speakers, with its own tunes for rare unlocks and completed sets.
  • It tells you when it's ready. When a game starts, the TV says it's ready and how many achievements you have, so the phone can lie face down.
  • 720p over HDMI, with sound. 4:3 like an NES on a TV, or 8:7 with square pixels.
  • The look of a CRT. Scanlines, aperture grille, grille with scanlines or slot mask, in light or strong. Bright makes up for the light a mask takes, and HDR drives an HDR TV's lit stripes far brighter.
  • Original speed. For speedrunners the NES can run at its own 60.1 Hz instead of 60 Hz. The AVS asks you to press A on the controller to keep it, so a TV that can't show it never leaves you with a black screen.
  • Progress on the TV. Steps toward an achievement, like 3/16, show for two seconds, without a chime.
  • A menu on the TV. Hold Select + Start for two seconds: the game pauses and dims, and you change the look or open your achievements right there. The app keeps the same settings.
  • Your achievements on the TV. Pick ACHIEVEMENTS in the menu to scroll the game's whole set over the paused game: what's unlocked, what's left, points and progress bars. The phone keeps it current while you play.

1. Install the firmware

Connect the AVS to your phone, switch it on, and choose Install Cheevotron in Settings › AVS › Firmware (the button names the version). It takes about two minutes over the AVS's own USB cable; nothing needs opening. If anything interrupts it, install again: the AVS always comes back on USB. A cartridge can stay in: its game stops while the firmware installs and starts over afterwards.

Cheevotron's firmware was made on one AVS, and boards from other production runs may differ. If yours is a kind the app hasn't seen working yet, it says so before installing. Please try it anyway: if a game or the achievements don't work, go back to RetroUSB's firmware (below) and write to hello (at) cheevotron (dot) com with what you saw. The first unlock on a new kind of AVS tells our server that it works (only the AVS's USB identity, nothing about you), so later owners of the same kind don't see the note.

2. Choose how unlocks look

Try it here: pick a style, switch the picture shape and tap a spot on the TV. In the app it's the same, under Settings › AVS › Pop-ups on the TV.

3. Play

Insert a cartridge and switch on. The phone reads the cartridge once to identify the game; after that the achievements load and Cheevotron follows the game. Changing the cartridge needs a power cycle, as on any NES.

Tested with NROM, UxROM and MMC1 cartridges (save RAM counts too, for sets that read it) and with the EverDrive N8 Pro, MMC3 games included.

EverDrive N8 Pro

Pick the backup of one of your own cartridges in the EverDrive's menu: the phone identifies it and the achievements load, as with a cartridge. The N8 Pro needs more power than a phone's USB port gives: connect the AVS through an OTG hub with its own charger. On the phone's power alone the AVS restarts every few seconds.

Going back to RetroUSB's firmware

Cheevotron's firmware replaces RetroUSB's while it's installed, so RetroUSB's own menu and features aren't there. To go back, download AVS-v1.52.bin from retrousb.com, then choose Back to RetroUSB's firmware… in Settings › AVS › Firmware and pick the file. Install Cheevotron's again whenever you like.

Built on the MiSTer NES core

The firmware is our own FPGA design for the AVS, built around the CPU, picture and sound parts of the MiSTer NES core, and licensed under the GPL-3 like the core. Its complete source code comes with the app: open Settings › General › Licenses and choose Save the firmware's source code. Cheevotron isn't affiliated with RetroUSB.

Last updated November 20, 2026. Something unclear or wrong? Tell us at hello (at) cheevotron (dot) com and we'll fix the page.