NES on the RetroUSB AVS

Supported

Achievements on a real NES.

Play your original NES cartridges on the RetroUSB AVS and earn achievements. Cheevotron's firmware for the AVS sends a sharp 720p picture over HDMI and shows every unlock right over the game on your TV, with a chime.

One email at launch, one per release. No spam.

  • Original NES cartridges. The EverDrive N8 Pro works too, with backups you made of your own cartridges.
  • Pop-ups on your TV in eight spots, with the chime
  • Installs from your phone over the AVS's own USB cable. Nothing to open.
The pop-up as the AVS draws it on the TV, in its own pixel font with the achievement's badge.

Android only. Cheevotron's firmware plays real cartridges and the EverDrive N8 Pro on the AVS: an Android phone identifies the game and the achievements unlock on the TV.

How it works

Three steps, no computer.

Install the firmware

Connect the AVS to your phone with its USB cable, switch it on with no cartridge inserted and tap Install. About two minutes later it runs Cheevotron. Nothing needs opening, and if anything interrupts the install, you simply start it again.

Insert a cartridge

Switch on with the phone connected. The phone reads the cartridge once to identify the game and loads its achievements, and the TV says it's ready.

Play

Every unlock pops up over the game with a chime through the TV's speakers, and lands on your Cheevotron profile.

The firmware

Your NES cartridges in HD, with unlocks on the TV.

Cheevotron's firmware is a complete firmware of its own for the AVS, built around the MiSTer NES core. Here's what it gives you.

Unlocks on your TV

A toast with the badge, title, points and description, or just the badge, in one of eight spots inside the picture. Rare unlocks and completed sets get their own tunes.

720p over HDMI, with sound

4:3 like an NES on a TV, or 8:7 with square pixels.

The look of a CRT

Scanlines, aperture grille, grille with scanlines or slot mask, light or strong. Bright makes up for the light a mask takes, and HDR drives an HDR TV far brighter.

Original speed

For speedrunners the NES can run at its own 60.1 Hz instead of 60 Hz. The AVS asks you to press A to keep it, so a TV that can't show it never leaves you with a black screen.

A menu on the TV

Hold Select + Start for two seconds: the game pauses and dims, and you change the look right there. The app keeps the same settings.

It tells you when it's ready

When a game starts, the TV says it's ready and how many achievements you have, so the phone can lie face down.

On the TV

Put the pop-up where it never gets in the way.

Pick a style, switch the picture shape and tap a spot on the TV. In the app it's the same, under Settings › AVS › Pop-ups on the TV.

What you need

An AVS, your cartridges, your phone.

  • A RetroUSB AVS with Cheevotron's firmware. The app installs it over the AVS's USB cable.
  • Your NES cartridges.
  • A TV or monitor with HDMI.
  • A USB cable from the AVS to the phone. Most phones need a USB OTG adapter; an OTG hub that also charges the phone works well for long sessions. The EverDrive N8 Pro needs more power than a phone's USB port gives: connect the AVS through an OTG hub with its own charger.
  • An Android phone with Android 9 or newer.
  • A Cheevotron account, and later this console's connector. Sign up with your email in the app. Your first 10 achievements on this console let you try it on your own hardware, and they stay yours; for more, the connector is a one-time purchase (prices).

Game support

Real cartridges, tested one by one.

Tested on a real AVS

We play cartridges on our own AVS and check that the phone identifies them and the achievements unlock on the TV: NROM, UxROM and MMC1 cartridges with their save RAM, and the EverDrive N8 Pro, MMC3 games included.

Something doesn't work?

We can't test every NES cartridge. If one of yours doesn't work, write to hello (at) cheevotron (dot) com with the game's name and region, and we'll look into it.

Check your version

Achievement sets belong to specific versions of a game. The game's page on this site lists the versions it supports.

FAQ

AVS questions.

What changes on my AVS?
Cheevotron's firmware for the AVS is a complete firmware of its own, built around the MiSTer NES core. While it's installed, RetroUSB's own menu and features aren't there. You can go back whenever you want (see the next question).
Can I go back to RetroUSB's firmware?
Yes. Download AVS-v1.52.bin from retrousb.com, then choose Back to RetroUSB's firmware… in Settings › AVS › Firmware and pick the file. Install Cheevotron's again whenever you like.
Do I have to open the AVS?
No. The firmware installs over the AVS's own USB cable. If anything interrupts the install, start it again: the AVS always comes back on USB.
Do I need to look at the phone while I play?
No. The TV says when it's ready, every unlock pops up over the game and the chime plays through the TV's speakers. The phone can lie face down next to the AVS.
Is the firmware open source?
It's built around the CPU, picture and sound parts of the MiSTer NES core and licensed under the GPL-3 like the core. Its full source code comes with the app. Cheevotron isn't affiliated with RetroUSB.
Does it work with an EverDrive?
Yes, with the EverDrive N8 Pro. Pick a game in its menu and the phone identifies it. The N8 Pro needs more power than a phone's USB port gives, so connect the AVS through an OTG hub with its own charger.
When does the AVS work for everyone?
With the first release of the app. Before that it passes our release checks: the install from more phones, every AVS board revision we can find, and long play sessions without a lost unlock. Leave your email below and we'll tell you.

All questions and answers →

Get Cheevotron

Your NES cartridges have achievements waiting.

Leave your email and we'll tell you the day Cheevotron is out.

One email at launch, one per release. No spam.